Produktai skirti polimerinis puras (17)

Dr. Paul Lohmann® offers Ferric Polymaltose Complex as powder in chem. pure. For pharmaceutical applications, it is used for the treatment of iron deficiency anaemia. For food applications, it is used for iron fortification. Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

DETAILING & PAINT CORRECTION

Diamantpulver für Polituren und Abtrag - hochwertige Klassierungen ausgewählter Kornqualitäten für beste Abtragsleistungen bei kratzerfreien Oberflächen - auf Basis langjähriger Erfahrungen ausgewählter Korntypen für die Bearbeitung weicher, harter, sprödharter und kristalliner Materialien

Zu den Hauptanwendungen zählen beispielsweise: - Reibbeläge - Spezial-Papiere - Putze - Harze

Polyimide Resin Polyimide Resin Powder are known for thermal stability, good chemical resistance, excellent mechanical properties, and characteristic orange/yellow etc color.Thermoset polymer matrix polyimides exhibit very low creep and high tensile strength. These properties are maintained during continuous use to temperatures of up to 360 °C. Composite Polyimide Resin Powder (PTFE composite wholly aromatic polyimide resin powder) It is used for compounding with polytetrafluoroethylene (PTFE). Generally, the addition amount is 5%-15%, which can greatly improve the wear resistance of PTFE and slightly improve the heat resistance of PTFE.Characteristics: High temperature resistance, self lubrication, friction resistance, easy processing. Application: Bearing, shaft, bearing, seal gasket, etc. Yancheng Tiandi Insulation Co.,Ltd web :https://www.polyimide-pi.com/polyimide-powder-varnish.htm mail: hsinsulation@aliyun.com hsinsulation@hotmail.

Sheets and rods.

Propylene Glycol is most commonly used for the large-scale production of polymers. It is used as chemical raw material for the making of unsaturated polyester resins (UPR). It reacts with unsaturated maleic anhydride and isophthalic acid to form a copolymer. It is reacted with propylene oxide to make oligomers and polymers that are consumed for the production of widely used polyurethanes. It is useful in water-based acrylic architectural paints. It’s slow evaporation rate allows it to stop the surface from drying. It is approved for use indirectly as a food additive. It has the E-number E1520 for food applications. It is used in coffee-based drinks, liquid sweeteners, ice cream, and soda etc. It is widely used in cosmetics and pharmaceuticals. E490 is the number for cosmetic products and pharmacological products. It is applicable as a carrier or base for many types of makeup in the cosmetics industry. Acid Number:≤0.5mg KOH/L Water:≤0.5%

Praseodymium(III) chloride is used in producing metal praseodymium and praseodymium compounds,glass,ceramic and coloring. Form :powder Form :crystalline

Chemical appearance Ethyl Vinyl Ether or Ethoxyethene has a colorless transparent appearance and come in a liquid form. It has a distinguishable ether odour and is very soluble in water. It has a density of 0.753 g/mL. Chemical application and strength Ethyl Vinyl Ether or Ethoxyethen is a chemical which has a wide range of industrial applications. One of its main uses is in the production of varnishes and adhesives. It is also used as an anesthetic drug which is suitable for all ages. Its application in the medical field covers operative procedures which don’t require muscle soreness. A great satisfactory agent used in thoracic procedures, given that hypotension risk is avoided. CAS Number:109 – 92 – 2 HS Code:290919

Das Gummi NP- Granulat ist frei von kanzerogenen N- Nitrosaminen und Weichmachern.

Polyquaternium-7 is a quaternary ammonium compound used as an antistatic agent,fim former and hair fixative,in cosmetics and personal care products,the quaternary nitrogen atom in Polyquaternium-7 always carries cationic charge regardless of the pH of the system.At high pH,the presence of hydroxyl groups may reduce the normally high water solubility of quaternary ammonium compounds.The positive charge on the quats attracts them to the slightly negatively charged skin and hair proteins.Polyquaternium-7 prevents or inhibits the buildup of static electricity and dries to form a thin coating that is absorbed onto the hair shaft. Polyquaternium-7 also helps hair hold its style by inhibiting the hair's ability to absorb moisture. CAS. No:26590-05-6

At the most important trade fair for industrial textiles and yarns, Techtextil 2019 in Frankfurt a. Main, presented the new product range of fluorinated polymers as well as the newly developed product range with the high-temperature polymer PEEK. The new product range of PEEK monofilaments includes diameters of 70 - 500 µm. The product range is produced on a newly constructed high-temperature spinning line. The new line allows the production of monofilaments with different shrinkage levels as well as the use of spinning dyes. The high service temperature in continuous use of 250°C is one of the outstanding properties of PEEK. In addition, PEEK monofilaments have good chemical resistance and are resistant to gamma radiation. The inherent flame retardancy is another outstanding property of PEEK. Due to their chemical and physical properties, the high-quality PEEK monofilaments are suitable for use with special screen and filter fabrics. Fabrics made of PEEK monofilaments ar Material:ARKPEEK-1000 Composition:100% Pure PEEK Polymer:Polyetheretherketone Engineering:High Performance Temperature:High Temperature Resistance Mechanical:High Mechanical Strength Characteristics: Sliding, Abrasion & Wear Resistance

Tetraethylenepentamine – TEPA, similar in appearance to most amines, is not colourless but has the appearance of a yellow coloured liquid. It is a somewhat viscous liquid. It is soluble in many polar solvents. It is slightly less dense than water. Its vapours are heavier than air Boiling Point:340 °C(lit) Purity:99% Density:0.998 g/mL at 25 °C(lit) Vapour Density:6.53 (vs air) Flash Point:365 °F

PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite Material:ARKPEEK-1000 Composition:100% Pure PEEK Temperature:High Temperature Resistance Engineering:High Performance Chemical:Chemical Resistance Mechanical:High Mechanical Strength Characteristics:Sliding, Abrasion & Wear Resistance Size:1/8-10"

PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite Material:ARKPEEK-1000 Composition:100% Pure PEEK Temperature:High Temperature Resistance Engineering:High Performance Chemical:Chemical Resistance Mechanical:High Mechanical Strength characteristics:Sliding, Abrasion & Wear Resistance Size:Customized

Potassium Butyl Xanthate is a reagent that plays a pivotal role in modern mining and metallurgy. Flotation Process Facilitator: Potassium Butyl Xanthate is an indispensable ally in the flotation process, a cornerstone of mineral extraction. Flotation involves separating desired minerals from their ores. Selective Adhesion: When introduced to a slurry of finely ground ore and water, Potassium Butyl Xanthate selectively adheres to sulfide minerals present in the mixture. These minerals, often hosting valuable elements like copper or lead, exhibit a unique affinity for the xanthate. Bubble Attachment: Air bubbles are introduced into the slurry. The hydrophobic mineral surfaces coated with Potassium Butyl Xanthate collectors readily attach to the bubbles, effectively making them float to the surface. Rising to the Top: The mineral-laden bubbles rise to the surface of the flotation cell, forming a froth layer. CAS Number:871-58-9

Chemical appearance: Copper (II) sulfate pentahydrate is a blue crystalline solid. It is not combustible and has a strong, nauseating metallic taste. However, it is odorless. When dehydrated, it turns white. Chemical application and strengths: Copper sulfate is made by treating copper with hot concentrated sulfuric acid. The crystal combines with other elements for the preparation of different compounds. In its pure nature, it is used as fungicide. It is also mixed with sodium hydroxide to control fungus in melons and grapes. Copper sulfate is used in swimming pools as an algaecide. It is also used for the control of invasive plants in the pools and controls roots that may have punctured the piping system. Fish farmers use it to kill off the invasive types of snails in aquariums. However, its use in the aquarium is highly controlled, as it is toxic to fish in high quantities. CAS Number:7758-99-8 HS Code:283325